Description
Specification
| Appearance | Transparent Viscose Liquid |
| Nature | Acrylic |
| pH (1:10 solution) | 6 – 7 |
| Ionity | Anionic |
| Moisture, % | 70 ± 1 |
| Activity, % | 40 – 43 |
| Safety | According to the best of our experience, it does not have any harmful effect on health |
| Packing | 200 KG PE Drums or IBC Tanks |
| Shelf life | 1 year |
Applications & Recommendations
- Munitan ME-40 is applied with other types of Munitans to obtain full and soft leather. If it is combined with Munitan ME-54, more fullness will be obtained.Munitan ME-40 acts as a very good filling agent for flanks of the skins or hides. Before retannage, the leathers must be neutralized well. In the case of vacuum drying, small dosage of this product at the top, makes the grains very fine and glossy and fixes the other chemicals.The dosage of consumption depends on the type of the leather and varies between 2-3% (based on the shaved weight).
After Neutralization:
80% Water 35°C
X% Dye 45-60 min
1-1.5% Munitan ME-40
2-3% Rockytan RE-540 30 min
+ Other retanning agents
For better efficiency, after main Fatliquoring:
0.5% Formic Acid 30 min
1-2% Munitan ME-40 30 min
0.5% Formic Acid 30 min
Storage Conditions
The product should be well sealed and must be stored in covered area between 5-25°C. Freezing and direct sun light must be avoided.
